The advantage of Thermal Imaging Home Inspection is that more of the house can be inspected with more efficiency than without a Thermal camera.
Infrared Thermal Imaging Scans are the best way to find many issues in a house that you are buying. Don't buy a new or old House without a Thermal scan.
Is your Home Inspector using Thermal Imaging if not Find one that is?
How it works
In the most basic of terms infrared is seeing the heat or temperature differences of the surface. You can see were someone has walked barefoot with a thermal camera that is how sensitive thermal imaging cameras are. The infrared spectrum is not visible by our eyes however with an infrared camera; we can see the heat that objects give off or leave behind. The environment has a lot to do with distinguishing an issue.
Can Infrared Thermal Imaging see through the walls like an X-ray?
No however it can see moister and temperature differences in the wall like no insulation or hot or cold pipes that are touching the sheetrock or changing the temperature of the sheetrock and lots of times the studs are visible because of the temperature differences.
How is Infrared Thermal Imaging useful or important for your home inspection?
It allows the inspector to see things that are not visible with eyes alone and scanning larger areas for a more complete inspection on your new home.
Moisture Intrusion, Leaks, Condensation
Moisture will in most cases be colder making the wet spots show up as a darker color easily seen with the thermal camera. R Eyes Home Inspections has seen windows leaking on the header from the roof leaking or bad flashings and could not see any stains with my eyes. R Eyes Inspections has also seen water penetration from a flowerbed draining to the house and leaking in around the baseboards wetting the carpet. We have also found cabinets that were wet from a small leak in the plumbing behind the cabinet unit. All were found with the Thermal Imaging camera that would not have been found without this tool.
Electrical Issues
Overheating wires, switches, breakers and outlets stand out with the thermal camera as a lighter color. Often I find dimmer switches that are over loaded making them very warm and could be a fire hazard in some insatiateness.
Insulation Anomalies
With the right temperature differences from inside to outside or delta T an infrared camera can see isolation issues and be spotted very easily. R Eyes Inspections has seen sheetrock temperatures as hot as the attic temputure, these areas act like a heater in the house when you have the A/C on and an air conditioner in the winter reducing the efficiency of your house. These areas will not save you a ton of money but reducing every little area helps to reduce the total bill.
Improperly Connected HVAC Ductwork
This is one of the most common things that I find in a home inspection and is relatively easy to fix and can be a big savings on your electric or gas bill all year around. Air blowing in the attic just makes the unit run longer to cool or heat your house.
Why is your inspection price not the lowest in the area?
We at R Eyes Home Inspections spend the time that it takes to inspect your house properly regardless of the time that it takes to do it. We are Dedicated to giving you all the information that we can obtain on the house that you are buying so you can make the house the best it can be.
Why don't all inspectors have infrared?
The equipment is very expensive, difficult or time consuming to learn to think differently. Because they have not seen what Thermal Imaging can do on a Home Inspection! I would not do a Home Inspection without my Thermal Imaging camera!
Call 940-390-4083 for the best Inspection WWW.REyesInspections.com or email Robert@Reyesinspections.com
Happy House Hunting